Floor Tiles for Indian Homes – 2026 Prices, Types & Expert Guide

600x1200 mm tiles are exactly 2 feet × 4 feet (24 × 48 inches), also written as 60 × 120 cm. One tile covers 0.72 square metres — approximately 7.75 sq ft. A standard 2-tile box covers 15.5 sq ft, making quantity calculation for any room straightforward. For a 200 sq ft living room, estimate 26–27 boxes plus 10% wastage.

Price varies by brand, finish, grade, and location. Ex-works Morbi pricing for GVT starts in the lower range; PGVT and carving finish collections carry higher ex-works prices. Retail showroom prices in metros include transport, distribution margins, and branding premiums that can raise the per-sq-ft cost substantially above wholesale. Always verify current pricing with your local dealer or directly with a Morbi supplier. Add 18% GST to all tile prices. For the most accurate current pricing, call a Morbi-based supplier directly and request an ex-works quote for your required finish and grade — then add 18% GST, freight, and installation separately to build your true project cost.

Matt GVT and textured finishes with R10 or higher slip resistance ratings are suitable for bathroom floors. PGVT and high-gloss polished finishes are not they become dangerously slippery when wet, regardless of their water resistance rating. Always confirm the R-rating on the specific product batch before specifying for a wet-area floor. For bathroom walls, PGVT is perfectly safe and commonly used.

Standard sand-cement mortar is not suitable. The correct specification is polymer-modified C2TES1 adhesive per EN 12004 and IS 15477:2019. This formulation provides the full-coverage bonding, deformability, and thermal movement tolerance that low-porosity large format tiles require. Back-butter both the tile and the substrate (double notching), and allow 2–3 minutes of slake time after mixing the adhesive before application.

GVT (Glazed Vitrified Tile) retains the original hard glaze (Mohs 5–7), making it durable and available in R10/R11 anti-skid variants. PGVT (Polished Glazed Vitrified Tile) undergoes a post-firing nano-polish that produces a mirror-like gloss (Mohs 3–4 surface hardness, PEI Class III). GVT is the correct specification for commercial spaces, wet areas, and outdoor applications. PGVT is for residential living rooms and bedrooms where visual impact is the priority and surface hardness is secondary. For heavy-traffic commercial floors where edge chips are inevitable, full-body vitrified material is the correct specification — the pattern runs through the entire tile body, making chips invisible at the surface.

Yes and it's increasingly common on feature walls, bathroom walls, and exterior facades. Wall installation uses C2TES1 adhesive for indoor applications and C2TES2 for exterior. Back-buttering is mandatory for full bond coverage. During curing, mechanical support or temporary bracing prevents tile slippage on vertical surfaces. A vertical stack bond layout on walls also has a useful spatial effect: it visually increases perceived ceiling height, which is a practical benefit in standard 9-foot Indian apartments.